Pneumatic conveying system
Product Overview
Pneumatic conveying system is an important link in the production and treatment of solid bulk materials. It is a process of conveying solid bulk materials in a sealed pipeline with air flow as the power. It is a relatively safe and environmentally friendly material conveying mode with long conveying distance, large conveying capacity and no residual materials.
● Dilute phase positive pressure conveying system
● Dilute phase negative pressure conveying system
● Dense phase positive pressure conveying system of rotary valve
● Dense phase positive pressure conveying system of transmitting tank

Performance characteristics
● Dilute phase positive pressure conveying system
Conveying gas speed: 15 ~ 40m / S
Delivery pressure: 0.03 ~ 0.1MPa
Maximum conveying distance: 800m
Maximum conveying capacity: 150t / h
Solid gas ratio: 3 ~ 15kg / kg
Conveying medium: it is suitable for conveying all powder and granular materials with good fluidity, small abrasiveness and low requirements for conveying damage rate, and multi-point to multi-point feeding.

● Dilute phase negative pressure conveying system
Conveying gas speed: 15 ~ 30m / S
Delivery pressure: - 10 ~ - 60kpa (g)
Maximum conveying distance: 100M
Maximum conveying capacity: 6t / h
Solid gas ratio: 3 ~ 5kg / kg
Conveying medium: it is suitable for conveying all powder and granular materials with good fluidity, small abrasiveness and low requirements for conveying damage rate, and multi-point to multi-point feeding.

● Dense phase positive pressure conveying system of rotary valve
Conveying gas speed: 1 ~ 10m / S
Delivery pressure: 0.1 ~ 0.7MPa (g)
Maximum conveying distance: 500M
Maximum conveying capacity: 150t / h
Solid gas ratio: 15-40kg / kg
Conveying medium: it is suitable for the conditions of good fluidity, good air permeability, high requirement for conveying damage rate of uniform granular materials, multi-point to multi-point feeding. It can meet the requirements of long-distance transportation by means of air supply along the way.

Dense phase positive pressure conveying system of transmitting tank
Conveying gas speed: 1 ~ 10m / S
Delivery pressure: 0.1 ~ 0.7MPa (g)
Maximum conveying distance: 1000M
Maximum conveying capacity: 150t / h
Solid gas ratio: 15-40kg / kg
Conveying medium: it is suitable for conveying materials with high abrasiveness and high requirements for damage rate, and feeding from single point to multiple points. It can meet the requirements of long-distance transportation by means of air supply along the way.

Hanrui Puzer Bulk Handling Technology (Shanghai) CO.,Ltd

address:No. 150, Lane 9299, Tingwei Road, Jinshan District, Shanghai

phone::021-51917600

fax:021-61304667

mailbox:service@hanruipuzer.com

If you have any suggestions for our products, please leave your valuable comments